ISOKING 100kg/m³ Mineral Wool Board with Aluminum Foil is a high-density, rigid stone wool insulation slab laminated with a reinforced aluminum foil vapor barrier. Engineered for superior compressive strength, radiant heat reflection, and Euroclass A1 non-combustible fire protection, it provides reliable thermal and acoustic insulation for curtain walls, cavity walls, flat roofs, steel structures, and HVAC ductwork.
Key Product Specifications:
Core Material: High-Density Basalt Mineral Wool / Stone Wool (100 kg/m³)
Facing: Reinforced Aluminum Foil (FSK) Vapor Barrier & Radiant Heat Shield
Standard Dimensions: Length 1200 / 2400 mm | Width 600 / 1200 mm
Thickness Range: 25 mm to 180 mm (Custom sizes available upon request)
Key Performance: Low thermal conductivity, high compressive resistance, moisture barrier, and sound absorption
Supply Capacity: MOQ 1x40HQ Container for global construction & distribution projects
ISOKING 100kg/m³ Mineral Wool Board with Aluminum Foil is a high-density, rigid stone wool insulation slab laminated with a reinforced aluminum foil vapor barrier. Engineered for building envelopes, curtain walls, steel roof decks, and rectangular HVAC ductwork, it combines radiant heat reflection, moisture control, acoustic attenuation, and Euroclass A1 non-combustible fire protection.
ISOKING 100kg/m³ Mineral Wool Board with Aluminum Foil pairs a high-density, thermoset-bonded basalt stone wool core with a smooth, tear-resistant aluminum foil facing. Unlike unfaced insulation panels, the factory-laminated foil surface acts as an effective vapor retarder and radiant heat barrier, preventing interstitial condensation inside wall assemblies while reflecting radiant thermal energy back away from conditioned spaces.
Pressed and cured to strict dimensional tolerances (1200 × 600 mm), these rigid mineral wool slabs maintain clean, square edges that butt tightly together between framing studs, curtain wall mullions, and roof purlins—eliminating thermal bridges and accelerating on-site installation.
Enhanced Thermal & Radiant Insulation: The 100 kg/m³ stone wool core provides low thermal conductivity (≤ 0.040 W/(m·K) at 25°C), while the bright aluminum foil facing reflects radiant heat transfer in metal roofs, curtain walls, and plant rooms.
Moisture Control & Clean Surface Finish: Reinforced aluminum foil blocks water vapor diffusion into the fibrous core, preserving long-term R-value in humid climates and air-conditioned buildings while providing a clean, dust-free interior finish.
Euroclass A1 Fire Resistance & Sound Reduction: Manufactured from non-combustible volcanic basalt fibers with a melting point exceeding 1000°C, the board resists flame spread and reduces airborne noise transmission across partition walls and mechanical enclosures.
| Product Type | Rigid Mineral Wool / Stone Wool Insulation Board with Aluminum Foil Facing |
| Nominal Density | 100 kg/m³ (Full production range: 80 – 150 kg/m³) |
| Thickness Range | 25 – 100 mm (e.g., 40 mm, 50 mm, 75 mm, 100 mm; up to 180 mm custom) |
| Standard Board Size | 1200 × 600 mm (Custom lengths up to 2400 mm available on request) |
| Thermal Conductivity | ≤ 0.040 W/(m·K) at 25°C (ASTM C177 / EN 12667) |
| Fire Reaction Class | Euroclass A1 Non-combustible Core (EN 13501-1 / ASTM E84) |
| Max Service Temperature | Core up to 650°C (Foil facing adhesive rated up to 80–100°C) |
| Facing Options | Pure Aluminum Foil / Reinforced FSK Foil / Double-Sided Foil (Custom) |

Rigid 100 kg/m³ stone wool slabs fitted behind glass facades, stone cladding, and rainscreen wall systems for firestop and thermal control.
Thermal and acoustic insulation boards for metal roof decks, logistics warehouses, and industrial factory envelopes.
Foil-faced insulation panels mounted on large sheet-metal air ducts to prevent condensation and attenuate fan noise.
Acoustic and fire-rated lining for generator rooms, elevator shafts, cleanrooms, and commercial partition walls.
At a nominal density of 100 kg/m³, dense basalt mineral fibers are cross-linked and cured into a flat, load-bearing rigid board that resists compression, sagging, and delamination. The firm board face supports mechanical anchor pins, stick clips, and structural adhesives, maintaining dimensional stability across repeated heating and cooling cycles in vertical walls and overhead soffits.
While 100 kg/m³ with single-sided reinforced aluminum foil is our most requested grade for curtain walls and commercial buildings, we manufacture densities from 80 to 150 kg/m³ and thicknesses from 25 to 180 mm. Share your architectural drawings, required R-value, and board dimensions, and our export team will match the exact grade and 40HQ container loading plan.

ISOKING foil-faced mineral wool boards are stacked in neat bundles and wrapped in heavy-duty, moisture-proof PE shrink film to protect the aluminum foil facing from scuffs, dust, and sea humidity during transit. Depending on destination unloading equipment, orders can be shipped floor-loaded in cartons/bags for maximum container volume or strapped onto heat-treated export pallets for forklift handling.
We supply full container loads (1×40HQ FCL) and LCL shipments worldwide, accompanied by a complete set of export clearance documents including Commercial Invoice, Packing List, Certificate of Origin, and Third-Party Material Test Reports.

A: The reinforced aluminum foil facing serves two key functions: it acts as a low-permeance vapor retarder to stop moisture and condensation from entering the stone wool fibers, and it reflects radiant heat energy to improve overall thermal insulation efficiency.
A: No. While the aluminum foil provides a durable vapor barrier and clean interior surface finish, outdoor roofs and facades still require protective outer metal cladding, stone panels, or weatherproofing boards suited to local wind and rain loads.
A: Yes. Single-sided reinforced aluminum foil in 1200 × 600 mm is our standard stock specification, and we also manufacture double-sided foil facing, black glass tissue facing, and custom lengths up to 2400 mm for bulk container orders.
Share your required board thickness, density (80–150 kg/m³), dimensions, and destination port. Our export team will reply within 24 hours with factory pricing and a 40HQ container loading calculation.
Contact Us on WhatsApp